Инженер по системам ВС

4 года 1 месяц

апрель 2020 — наст. время

Systems support engineer

Boeing (Operations Center, Services engineering), Moscow

Processing, coordination and response to customers’ AOG service requests related to all Boeing aircraft systems

2 года 6 месяцев

сентябрь 2017 — март 2020

Fleet support Engineer: Systems & Structures

Cargologicair (Cargo airline), London

• Initial set up of airplanes and processes set up in Maintenance information and scheduling system TRAX;
• Assessment of airworthiness directives (FAA, EASA), OEM Service Bulletins;
• Reliability assessment and corrective actions introduction into airplane maintenance program and processes.
• Airplane equipment configuration, maintenance and modifications.
• Liaison with major airplane component suppliers, incl meetings and conferences (GE, Collins, BAE, Honeywell)
• Preparing aircraft defect rectification plan, spare parts, and maintenance organization liaison. Airplane maintenance / repair / AOG event on site support.
• Airplane systems performance inflight tests and parameters monitoring for troubleshooting and preventative maintenance.

2 года

сентябрь 2015 — сентябрь 2017

Aircraft Systems Engineer

LLC Airbridgecargo Airlines (Cargo airline), Moscow

• Support to MCC and contracted MRO for Troubleshooting for difficult (long TBS, recurrent) issues;
• Reliability issues review and proposal of corrective actions;
• On-demand, C-check support on-site at Cargolux MRO (and other MROs like HAECO etc).
• Delivery team subcontracted for 747-8F to Cargologic Air at Boeing Everett Facility, 1 a / c;
• Customer (Airbridgecargo) representative at Boeing Everett Factory during 747- 8F assemblies (3 a / c)
• Participation in OEM conferences ie Boeing Fleet team teleconferences and Face to face meetings

3 года 11 месяцев

сентябрь 2011 — август 2015

Senior Engineer B767 and B777 Fleet

Transaero Airlines (Pax Airline), Moscow

• Delivery Process Leader of two B767 deliveries, at Boeing Shanghai MRO, GECAS (previously leased to Aeroflot) to Transaero
• Assessment of airworthiness directives (FAA, EASA), Boeing Service Bulletins, recommendations of components vendor and approved maintenance program requirements, evaluation of necessity of its implementation on Transaero 767 and 777 fleet. Preparation of all production process which is necessary for implementation: issuance of documentation (engineering order, job cards) preparation of necessary parts, kits and tools, planning.
• Preparation of all scheduled maintenance process in part of expendables, consumables, tools and parts.
• Control Non Mandatory modifications (Boeing SBs, STC, minor
modifications) applicable to Transaero 767 and 777 fleet – updating and control of Modifications and SB status.
• Based on reliability (reports from reliability analysis group i.e. flight delays, cost- burden), develop actions to increase reliability of aircraft systems and(or) components, decrease costs or flight delays, submit proposals to improve maintenance program and MEL.
• Based on Material department request, review parts / components / consumables interchangeability, and confirm or find any.
• Review proposals and if necessary preparation of requirements and contract with MRO for components modifications and(or) support programs. (now doing for thrust reversers of 777 RR and PW, previously did for 767 GE engines thrust reversers)
• Participation in OEM conferences i.e. Boeing Fleet team teleconferences and Face to face meetings (Everett / Seal Beach).
• Thrust reversers Cf680C maintenance and repair agreements preparation and shop visits support.

3 года 3 месяца

июнь 2008 — сентябрь 2011

Technical Documentation Engineer

Transaero Airlines (Pax airline), Moscow

• Monitoring and assessment of aviation authorities laws, internal company’s documents and etc., for essential documents which must be placed on board of aircraft, to be used by the cabin crew, flight crew, or technical crew, or foreign inspectors during ramp inspection.
• Receiving, registration, applicability assessment, copying and placing on boards of aircrafts, printed matter, and keeping them updated. (including but not limited: QRH, AFM, FCOM, CAOM, some internal Transaero airlines documents, Transaero flight operations manual)
• Managing technical documentation (CDs, technical documents server) providing all technical line stations with copies, and keeping them updated.

Высшее

2011 г.

МАИ, Москва

Факультет: Стрела

Специальность: Инженер по специальности Гидроаэродинамика

1

Дата окончания: декабрь 2019 г.

EWIS continuation training

Triton aerospace, г. London

1

Дата окончания: апрель 2019 г.

FUEL TANK SAFETY PHASE 1+2

Triton aerospace, г. London

1

Дата окончания: апрель 2018 г.

Human factors continuation training

Triton aerospace, г. London