Male, 39 years
Citizenship: Russia
|
8 years 4 months July 2016 — now |
Lead structural engineer at continuing airworthiness department PJSC Aeroflot Russian Airline (Airlines), Moscow - Structural repair dfp`s control delivered from different MRO (Airbus A320 / A330 and Boeing 737 / 777). |
|
3 years 6 months September 2012 — March 2016 |
Engineer at technical policy department OJSC Transaero Airlines (Airline), Moscow - Development of technical documentation (MJC, MJO, EO) related cabin maintenance modifications and scheduled maintenance tasks; |
|
4 months April 2012 — August 2012 |
Technician at line maintenance department OJSC Transaero Airlines (Airline), Moscow - Responsibilities according to maintenance job cards (service check, daily check, etc.); |
|
Higher 2009 г. |
Bauman Moscow State Technical University, Moscow Faculty Special Machinery Specialization Flight dynamics and aircraft control |
|
5 days End date: March 2020 |
Airbus course A320NEO T4 Gen Familiarization Airbus training center, г. Hamburg |
|
5 days End date: October 2019 |
Airbus course A350 T4 Gen Familiarization Airbus training center, г. Hamburg |
|
3 days End date: September 2019 |
OTAR part 39 continuing airworthiness requirements Aviator training school, г. Moscow |
|
End date: July 2019 |
Human factor – PART 66, Module 9 Aeroflot aviation school, г. Moscow |
|
End date: July 2019 |
Aviation legislation – PART 66, Module 10 Aeroflot aviation school, г. Moscow |
|
End date: May 2019 |
SMS (Safety management system) Aeroflot aviation school, г. Moscow |
|
End date: April 2019 |
XSA3 Advance Composite Repair for Technicians Course Airbus training center, г. Toulouse |
|
4 days End date: April 2019 |
VSD1 A350 SRM Gen Familiarization Damage Assessment Airbus training center, г. Toulouse |
|
5 days End date: August 2018 |
Introduction to Legacy Aircraft Drawings and Light Weight Geometry course Boeing training center, г. Seattle |
|
3 days End date: May 2018 |
AkzoNobel Aerospace Coatings training course AkzoNobel Aerospace Coatings, г. Sassenheim |
|
9 days End date: March 2018 |
Airbus course XSC3 Composite repair for engineers Airbus training center, г. Toulouse |
|
10 days End date: October 2017 |
Boeing course 471 - Composite Repair Design with Practical Application Boeing training center, г. Miami |
|
4 days End date: June 2017 |
Airbus course A318/A319/A320/A321 general familiarization course (CFM56&IAE V2500) Airbus training center, г. Hamburg |
|
3 days End date: May 2017 |
Airbus course XSC4 Fatigue and damage tolerance course Airbus training center, г. Hamburg |
|
10 days End date: April 2017 |
7X7 Aircraft structural repair for engineers – Part 1 with field trip course Boeing training center, г. Seattle |
|
5 days End date: April 2017 |
462 -7X7 Designing Repairs with the Boeing Heritage Structural Repair Manual Boeing training center, г. Seattle |
|
End date: February 2017 |
AkzoNobel Aerospace coatings Russia course AkzoNobel Aerospace coatings Russia, г. Moscow |
|
5 days End date: December 2016 |
Lufthansa course Boeing B777-200/300 (GE90) General Familiarization Theoretical Lufthansa training center, г. Hamburg |
|
5 days End date: October 2016 |
Lufthansa course Boeing B737-600/700/800/900 (CFM56) General Familiarization Theoretical Lufthansa training center, г. Hamburg |
|
End date: October 2014 |
Safety management system training Transaero aviation school, г. Moscow |
|
End date: August 2014 |
Human factor recurrent training Transaero aviation school, г. Moscow |
|
End date: April 2013 |
ETOPS maintenance training for mechanical/power plant/electrical/avionics system Transaero aviation school, г. Moscow |
|
End date: February 2013 |
Airlplane Electrical Wiring interconnection system (EWIS) Transaero aviation school, г. Moscow |
|
End date: January 2013 |
Fuel tank safety Phase 2 Transaero aviation school, г. Moscow |
|
End date: December 2012 |
Fuel tank safety, Phase 1 Transaero aviation school, г. Moscow |
|
End date: September 2012 |
Human factor initial Transaero aviation school, г. Moscow |
| Knowledge of foreign languages: |
English (Fluent) |
| Computer knowledge: |
Advanced user MS Office, CorelDraw, MyBoeingFleet, AMOS, AMASIS, Airnav. |
| Driver licence: |
Categories B |
Key skills and achievements:
Innovative person
Good communication and negotiation skills
Qualified and highly-professional
Eager to experience and learn new skills
Self-motivated and quality oriented
Able to prioritize assignments
Work as a team member or independently
Ready for travel frequently
Able to solve multitasks
